EasyManuals Logo

AJAX MultiTransmitter User Manual

AJAX MultiTransmitter
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Always active
When enabled, the detector is always in armed
mode
MultiTransmitter
Status and name of the MultiTransmitter to which
the wired detector is connected:
Temporary Deactivation
Shows the status of the device temporary
deactivation function:
Device # The number of MultiTransmitter zone to which
Shorted — the terminals to which the detector
is connected are shorted. Status is only
available in case of an EOL NC connection
Break — is displayed if the connected detector
is disconnected. Status is only available in
case of an EOL NO connection
Connected — MultiTransmitter is connected to
the hub
No connection — MultiTransmitter has no
connection with the hub
No — the device operates normally and
transmits all events.
Lid only — the hub administrator has disabled
notifications about triggering on the device
body.
Entirely — the device is completely excluded
from the system operation by the hub
administrator. The device does not follow
system commands and does not report
alarms or other events.
By number of alarms — the device is
automatically disabled by the system when
the number of alarms is exceeded (specified
in the settings for Devices Auto Deactivation).
The feature is configured in the Ajax PRO app.
By timer — the device is automatically
disabled by the system when the recovery
timer expires (specified in the settings for
Devices Auto Deactivation). The feature is
configured in the Ajax PRO app.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AJAX MultiTransmitter and is the answer not in the manual?

AJAX MultiTransmitter Specifications

General IconGeneral
BrandAJAX
ModelMultiTransmitter
CategorySafety Equipment
LanguageEnglish

Related product manuals