AJAX Tag User Manual

If you try to bind a Tag or Pass to a hub that has already reached the hub limit (13 hubs are
bound to them), you will receive a corresponding notication. To bind such a Tag or Pass to
a new hub, you will need to reset it (all data from tag/pass will be erased).
States
The states include information about the device and its operating parameters. Tag or Pass
states can be found in the Ajax app:
Parameter Value
User
The name of the user to which Tag or Pass is bound.
If the device is not bound to a user, the eld displays
the text Guest
Active
Displays the status of the device:
Identier
Device identier. Transmitted in events that are sent to
the CMS
Setting up
Tag and Pass are congured in the Ajax app:
Please note that after changing the settings, you must press the Back button to save them.
How to reset a Tag or Pass
1. Go to the Devices tab.
2. Select Passes/Tags.
3. Select the required Tag or Pass from the list.
Yes
No
1. Go to the Devices tab.
2. Select Passes/Tags.
3. Select the required Tag or Pass from the list.
4. Go to Settings by clicking on the icon.

AJAX Tag Specifications

General

Brand	AJAX
Model	Tag
Category	Security System
Language	English