AJP PR5 User’s manual – 2nd Edition Page
30
impermeable materials as a possible
humidity might not be able to escape
and could cause corrosion.
- Don’t let engine run for a short
time period. Engine would not get
warmed enough and developed
water vapour would condensate
when cooling, causing valve and
exhaust corrosion
RE-INITIATION AFTER STORAGE:
- Mount the charged battery (check
polarity).
- Fill up the tank with fresh fuel.
- Check motorcycle as before each start
(see DRIVING INSTRUCTIONS)
- Take a short, careful test ride first and
check all of your motorcycle systems.
To Next Page
Loading...
