Need help?Do you have a question about the AJP PR7 and is the answer not in the manual?
Essential advice for safe motorcycle operation and rider protection.
Checklist of critical checks to perform before each ride for safety.
Procedures and recommendations for the engine's initial 1000 km run-in period.
Techniques and safety precautions for effective braking on various surfaces.
Guidance on starting the engine and initial riding procedures for new owners.
Identifies major external components of the motorcycle using diagrams and labels.
Explains the function of handlebar controls, ignition switch, and instrument panel.
Periodic maintenance tasks to be performed by an authorized dealer, categorized by engine and chassis.
Routine maintenance tasks that the owner can perform at specified intervals.
Procedure for checking and refilling the engine oil level.
Step-by-step guide for changing the engine oil, including torque specifications.
How to check the coolant level and important safety warnings regarding the cooling system.
Steps for adjusting the drive chain tension and safety warnings about incorrect tension.
Importance and procedure for checking tire pressure for optimal performance and safety.
Procedure for inspecting the thickness of the front brake pads.
How to check the brake fluid level in the front brake master cylinder.
Details on engine type, timing, lubrication, ignition, fuel, clutch, and transmission systems.
Specifications for chassis, suspension, wheels, brakes, and fluid/fuel capacities.
Recommended lubricants and their suppliers for various motorcycle components.
General| Fuel System | Electronic fuel injection |
|---|---|
| Transmission | 6-speed |
| Rear Suspension | Mono shock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Starting System | Electric |
| Clutch | Wet multi-plate |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Ground Clearance | 300 mm |
| Engine Type | Single cylinder, 4-stroke |
| Cooling System | Liquid-cooled |
To Next Page
