In order to replace the cooling liquid, follow the next procedure:
― Remove the screw (1);
― Collect the liquid to an appropriate recipient ;
― Place back the screw (1);
― Fill the radiator with approximately 1.3 liters of recommended coolant liquid;
― Fill the expansion reservoir with 30% of its capacity.
Recommended coolant liquid: eni Permanent Spezial
The radiator fans (2) are located on the back side of both radiators. The fans are activated
automatically when the coolant liquid temperature reaches approximately 95ºC, being
deactivated when the temperature drops below the 85ºC.
To Next Page
Loading...
