EasyManua.ls Logo

AJP PR7 - Removing the Battery

AJP PR7
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D.20
ELECTRIC SYSTEM
REMOVING THE BATTERY
The battery (2) has a closed system and therefore requires no maintenance (MF). Keep the
battery poles clean and put slightly acid free grease if necessary.
To remove the battery:
Turn the seat lock (1) with ignition key and remove the motorcycle seat. The battery
is located above rear wheel;
Disconnect the negative pole (-) and then the positive pole (+) of the battery;
Unhitch the rubber band (3);
On assembly, first connect the positive pole and then the negative pole.
In case of motorcycle storage for a long period, remove the battery and recharge it every month
in normal charge mode. Keep storage in a dry place and with temperatures between 0-35⁰C. Do
not let the battery exposed to direct sun radiation.
DANGER
Battery is a closed model (MF) but can nevertheless emit explosive gases. Avoid
sparks and fire near the battery.
WARNING
Never reverse polarity or disconnect the battery while the engine is running,
otherwise the battery, voltage regulator-rectifier or other electric components will
be damaged.
1
2
3

Related product manuals