This motorcycle comes with a pair of keys. Be aware to keep one of the keys in safe place, at
home for instance, in order to access this key in case of need.
IGNITION SWITCH AND STEERING LOCK
ON – the ignition circuit is on and the engine can now be started. The key cannot be removed.
OFF – entire electrical circuits are cut off and the engine will not start. The key can be removed.
LOCK – the engine circuits are cut off and the engine will not start. The steering lock is actuated
and the handlebar cannot turn. The key can be removed.
To change to the LOCK position, the ignition switch must be in OFF position and the handlebar
turned all the way to the left.
Do not try to ride with the ignition switch on LOCK position. With the steering locked
is impossible to control the motorcycle.
Note: Start the engine as soon as you turn
key to ON position. Otherwise the battery
will discharge due the consumption of the
instrument panel, headlight and taillight.
To Next Page
Loading...
