AJP PR7 - Adjusting Front Fork Suspension

D.9
SUSPENSION
Note: Turn clockwise (+) the screws (1)
and (2) to place in fully closed position.
ADJUSTING FRONT FORK SUSPENSION
To adjust rebound of the suspension system:
― Turn the screw (1) clockwise in order to decrease the rebound speed.
― Turn the screw (1) counter-clockwise increase the rebound speed.
Standard setting: 12 clicks from the fully closed position
To adjust compression of suspension system:
― Turn the screw (2) clockwise to a harder response.
― Turn the screw (2) counter-clockwise to a softer response.
Standard setting: 12 clicks from the fully closed position
1
2