The following recommendations show the importance of a proper break-in to achieve maximum life and performance for the new AJP model.
Even high precision machined sections of engine components have rougher surfaces that require be operated with the other component surfaces,
in order to adjust to each other. Therefore, every engine needs to be broken-in during the first 1000 km.
For this reason, do not load the engine more than 50% of its capacity during the first 500 kilometers and avoid full throttle. After 500 km, you can
load the engine up to 75% of its capacity, using the gearbox frequently.
Allow sufficient idling time (1-2 minutes) with a cold or warm engine start up, before applying load or revving the engine. This procedure allows
the lubrication oil to reach all critical engine components.
The first 1000 km maintenance service is the most important maintenance that your AJP will receive. The motorcycle must be checked carefully,
restoring all the adjustments, retightening fasteners and updating the injection system condition.
To Next Page
Loading...
