AJP PR5 250 - RIGHT HANDLEBAR; FUEL

AJP PR5 User’s manual – 2nd Edition Page
6
RIGHT HANDLEBAR
1 – Throttle grip
Engine speed is controlled by the
position of the throttle grip. Rotate it
toward you to increase engine speed;
turn it away to decrease engine speed.
2 – Front brake lever
Front brake is applied by squeezing
brake lever gently toward the throttle
grip.
3 – Electric start button
This button is used for turning the
starter motor. With the ignition switch in
the ON position, the transmission in
neutral, starter switch on, pull the clutch
lever and push the electric start button
to engage the starter motor and start
the engine.
4 – Emergency switch
This switch has two positions: to the left
enables engine running, to the right
stops engine running. Be aware that
this switch is switched ON for engine
starting.
! CAUTION !
If EMERGENCY SWITCH is not ON,
engine will not start! Start motor will
not be actuated!
! CAUTION !
The EMERGENCY SWITCH should
be used to stop the engine in
emergency situations! Do not use it
to stop the engine when driving
otherwise the ignition system will be
destroyed!
FUEL
The PR5 250 engine needs unleaded
premium gasoline with an octane
number of 95 or higher. Never use
leaded fuel to avoid destroying catalytic
converter and the exhaust system.
! WARNING !
Using not recommend fuel can
cause severe damages on engine!
Be sure to use only unleaded
gasoline with an octane index equal
or higher than 95!
FUEL TANK CAP
Turn the fuel tank cap (1) counter-
clockwise to open it. Turn clockwise to
close and tighten it securely.