Need help?Do you have a question about the Akai 1722W and is the answer not in the manual?
General| Reel Size | Up to 7 inch reel |
|---|---|
| Signal-to-Noise Ratio | 50dB |
| Total Harmonic Distortion | 1.5% |
| Inputs | Microphone, Line |
| Type | Reel to Reel |
| Track System | 4-track, 2-channel stereo/monaural system |
| Tape Speed | 3.75 & 7.5 ips |
| Wow and Flutter | 0.08% (7.5 ips) |
| Semiconductors | 6 Diodes |
| Power Supply | AC 110-120V, 220-240V, 50/60Hz |
| Outputs | Line |
Detailed technical parameters and performance characteristics of the tape recorder.
Procedures for testing tape speed, wow, flutter, frequency response, and signal-to-noise ratio.
Step-by-step instructions for safely disassembling the tape recorder unit.
Guidelines for adjusting critical mechanical components like pinch wheels and reel tensions.
Procedures for aligning and setting the height of the erase and playback heads for optimal performance.
Checks and adjustments for the audio amplifier section, including bias and voltage levels.
Table listing the DC resistance values for various coils used in the unit.
Visual references showing the arrangement and identification of components.
Index of component blocks and their corresponding page numbers within the Parts List section.
Detailed circuit diagram for the 1722W model, illustrating electronic connections.
Detailed circuit diagram for the 1722L model, illustrating electronic connections.
To Next Page
