Need help?Do you have a question about the Akai MPC2000 and is the answer not in the manual?
General| Type | Sampler/Sequencer |
|---|---|
| Polyphony | 32 voices |
| Sampling Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| Memory | 2 MB (expandable to 32 MB) |
| Pads | 16 velocity-sensitive pads |
| Sequencer | Yes |
| Sequencer Resolution | 96 PPQN |
| MIDI | In/Out/Thru |
| Display | Backlit LCD |
| Storage | 3.5" floppy disk drive |
| Effects | No built-in effects |
| Outputs | 8 individual outputs |
| Inputs | 2 inputs |
| Audio Inputs | 2 (L/R) |
| Power Supply | Internal |
Essential safety measures to follow before and during equipment servicing.
Procedures for verifying safety standards after maintenance is completed.
Guide to engaging and performing various diagnostic test modes for the unit.
Provides important notes for ordering parts and using the parts list.
Introduces PC board blocks like ADA, VR, and LCD-J.
Lists components for the CPU PC Board.
Lists components for ADA, VR, and LCD-J PC boards.
Lists components for Panel, Jog, and Power PC boards.
Lists components for optional 8PARA/DIO, SMPTE, and Flash Memory boards.
To Next Page
