66
USING YOUR APPLIANCE
BEFORE FIRST USE: CHARGING
For best results, fully charge the unit
before use.
1. To charge the Bluetooth Parasol
Speaker, connect the supplied micro
USB cable to the USB charging port
and the other end to your computer
or USB charging device.
2. Make sure to charge for at least 4
hours before using the Speaker for
the first time.
Note: Turn the speaker off when it’s not in
use to save battery power.
SIMPLE INSTALLATION:
1. Push the Open/Close latch of the unit
to open up the speaker.
2. Install the speaker beneath the rib of
your umbrella.
3. Close the speaker around the main
pole and make sure the unit is then
fully locked together.
4. Don’t let go of the speaker until it
is closed and fully secured to the
umbrella pole.
PAIRING A SPEAKER WITH PHONE /
BLUETOOTH ENABLED DEVICE:
1. Turn on the Bluetooth speaker.
2. Turn on your Bluetooth enabled
device and activate the Bluetooth
function.
3. Search for the Bluetooth device,
“A58066” will show up.
4. If required, enter the password ‘0000’
to confirm and finalize pairing.
5. Your Speaker should now be paired
with your device.
Note: The speaker will automatically pair
with previously paired devices.
TURNING THE UNIT ON/OFF:
1. Press the ON/OFF button to switch
the unit on. The lights will cycle
through the 4 colour modes.
2. Press the LED light button to turn on
the light, press again to turn the light
off.
CHARGING EXTERNAL DEVICES
The Bluetooth Parasol Speaker comes
with an Integrated Power Bank, which
allows you to use this speaker as a USB
charger for your smart devices, such as
phones or tablets.
1. To use this function make sure the
speaker is fully charged.
2. Turn on the speaker and connect your
device to the USB charging port.
To Next Page
Loading...
Need help?
General
