Note: The speaker can still be used while charging the battery, but will take more time to fully charge.
USING BLUETOOTH:
1. Flip the ON/OFF switch to the ON position. The speaker will beep and a blue LED will flash quickly. The speaker will announce that it is ready to
pair.
2. Turn on the Bluetooth feature on your external device and look for “A58071”.
3. Select the speaker name and pair it with your device. If a password is required, press “0000”.
4. Once you’re connected the LED light will stop flashing indicating your device has successfully paired.
5. If pairing is unsuccessful, restart both devices and repeat the steps above.
6. Use the media controls on the speaker Control Panel or connected device to control playback.
To Next Page
Loading...
Need help?
General
