BASIC OPERATION:
• To turn the speaker on, slide ON/OFF switch to the left.
• The speaker will beep and a blue LED will flash quickly. The speaker will announce that it is ready to pair, and once again when connected.
• The blue LED will blink slowly when playing music.
• The speaker will beep every 20 seconds when the battery is low.
• To turn speaker off, slide the On/Off switch to the right.
• When music is ready to play by applying a Short Press to the Skip Forward/Skip Backward buttons you can cycle through your tracks.
• To adjust the speaker volume, Long Press the Plus (+) or Minus (-) buttons on the Control Panel.
To Next Page
Loading...
