10
TROUBLESHOOTING
No sound/Power Volume turned down
Power cord not securely
connected
Batteries dead/incorrectly
inserted
Adjust the volume using the
volume dial
Reconnect the power cord
Remove the batteries and
re-insert. If it still does not work,
insert fresh batteries.
No radio signal Antenna not adjusted/no
frequency
When listening to FM radio, ensure
the antenna is fully adjusted.
Use the tuning dial to adjust the
radio frequency.
WARNING:
DO NOT IMMERSE ANY PART OF THE APPLIANCE
IN WATER
CLEANING & CARE
1. Always disconnect the Retro Radio
from the power supply and/or remove
the batteries before cleaning.
2. Clean the Retro Radio with a soft,
damp, lint free cloth.
3. Do not use abrasives or harsh
cleaners
To Next Page
Loading...
