i
● Upon switching on, the appliance is default in the radio mode, unless
there is a disc in the slot.
● Selection of the USB mode or the memory card mode only works if a USB
device or a memory card is placed in the slot.
Radio functions5.3
● To select the radio band, press the BAND button (7) to toggle between
FM1, FM2, FM3.
● To select a preset radio station, press the appropriate PRESET STATION
button (22) shortly.
● To search for a specic frequency, press the PREV button (15) or the
NEXT button (16) repeatedly until the desired frequency is set.
● To search automatically, press and hold the PREV button (15) or the
NEXT button (16). The appliance searches for the next available station.
● To perform an automatic search for preset radio stations, use the AUTO
SEEK function (5). Short press to search for all preset stations in the
memory of the current band and stay on each memory station for about
5 seconds. Long press to save the stations with good reception
automatically and scan each station for about 5 seconds.
● To perform an automatic scan of preset radio stations, use the SCAN
function (8). Press to scan all preset stations in the memory of the current
band and stay on each memory station for about 5 seconds.
● To show extra information about a radio station (program type/radio
name/radio test), press the DISP button (4).
Programming radio stations
Per radio band (FM1, FM2, FM3), 6 radio stations can be preset.
● Search for a radio station.
● Press the PRESET STATION button (22) for more than 1 second to store
the station under the desired preset number.
Using the PTY function
● To search a radio band for a specic program type, press the PROG/PTY
button (25) prior to start the search:
- PTY MUSIC: the search is limited to radio stations with program type
MUSIC
To Next Page
Loading...
Need help?
General
