SEEK
- SEEK 1: the automatic search for a preset radio station is stopped when
a radio station is detected, even if you keep pressing the AUTO SEEK
button (12)
- SEEK 2: the automatic search for a preset radio station is not stopped
when a radio station is detected, as long as you keep pressing the AUTO
SEEK button. Upon releasing the AUTO SEEK button, the automatic
search stops when a radio station is detected.
STEREO
- STEREO: stereo audio reception
- MONO: mono audio reception. In the case of a weak FM signal, the audio
quality can be improved by selecting this mode.
LOCAL
- LOCAL: during manual tuning, only radio stations with strong signals are
found. This is the preferred setting in areas with strong signals.
- DX: during manual tuning, all radio stations are found, independent of the
signal strength. This is the preferred setting in areas with weak signals.
VOL LAST
- VOL LAST: after switching on the unit, the volume level is the previously
set volume level
- VOL ADJ: after switching on the unit, the volume level is the initial volume
level
Resetting the appliance5.9
If any of the buttons on the appliance does not operate or if the error symbol
appears on the display, the appliance needs to be reset.
● Press the OPEN PANEL button (21) to release the panel.
● Press the RESET button (29).
To Next Page
Loading...
Need help?
General
