Akai ACP-64

12
16
17
18 19 20
DESCRIPTION OF UNIT AND CONTROLS (Suite)
16. FOCUS ADJUSTMENT FOR PROJECTION UNIT
17. DISPLAY
18. AC POWER CORD
19. TEMPERATURE SENSOR (IN DOOR)
20. FM ANTENNA
DISPLAY DESCRIPTION
TIME & CALENDAR SETTING
TIME AND CALENDAR MANUAL SETTING
Press CLK.ADJ.TEMPERATURE button (11), in standby mode, and keep
depress over 2 seconds to enter time set mode, after enter the setting mode,
press CLK.ADJ.TEMPERATURE button (11) to change the mode cycle as
follows :
Normal → Year → Month → Day → 12/24 H → Real time Hour → Real time
Min → Normal
Action (during data adjustment):
- Press << / Tune - button (2) to adjust data backward.
- Press >> / Tune + button (10) to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
PM Indicator
STANDBY Indicator
ALARM 1 Indicator
MHz Indicator
ALARM 2 Indicator
TIME Indicator