DVD/CD functions
● Switch on the units. Select the DVD mode.
● To insert a disc:
Press the OPEN button (1) to open the disc compartment.•
Insert the disc with the label upwards.•
Close the disc compartment.•
The display shows the total number of tracks on the CD.
● To start playback, press the PLAY/PAUSE button (62) once.
● For extended instructions, read the paragraph "DVD/CD functions" further
on in this manual.
USB functions
● Switch on the master unit.
● Insert the USB device in the slot (3). The device can only be connected
one way.
● Select the USB mode.
● To start playback, press the PLAY/PAUSE button (62) once.
● For extended instructions, read the paragraph "USB functions" further on
in this manual.
SD/MS/MMC functions
● Switch on the master unit.
● Insert the SD/MS/MMC device in the slot (2). The device can only be
connected one way.
● Select the memory card mode.
● To start playback, press the PLAY/PAUSE button (62) once.
Game functions
● Before connecting the game pad, make sure that the game pad is
switched off before connecting to the appliance.
● Connect the RCA cable to the appliance.
The yellow plug is for the video signal.•
The red and white plug are for the audio signal.•
● Switch on the appliance.
● Slide the power switch (34) to the ON position.
To Next Page
Loading...
Need help?
General
