Akai ACVDS935T

18
Audio setup page
Downmix
● Select LT/RT to mix 5.1-channel audio into left channel and right channel.
● Select STEREO to mix 5.1 channel audio into signal stereo.
i
This function is only available for Dolby AC-3 encoded 5.1-channel
discs.
Digital output
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
Dolby digital audio setup
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
● Mix-Mono: the average of both the left and right channel.
i
This function is only available for Dolby AC-3 encoded 2-channel
discs.
DYNAMIC
● Select the value for the dynamic range compression to avoid losing sound
details resulting from a low volume.
Video setup page
● SHARPNESS: to adjust the screen sharpness.
● BRIGHTNESS: to adjust the screen brightness.
● CONTRAST: to adjust the screen contrast.
● HUE: to adjust the screen tint. This option is available for NTSC playback only.
● SATURATION: to adjust the saturation.
Preference setup page
i
The general system functions can only be set with an empty DVD
player.