General setup page
● To navigate through the menu, press the UP button (29) or the DN button
(28) or rotate the VOLUME dial (11).
The following menu items can be set:
- NETWORK CONFIG: to congure the network.
- VERSION: to show the version information of the appliance.
- UPGRADE FIRMWARE: to check automatically if new rmware is
available.
- LANGUAGE: to change the language.
- FACTORY RESET: to restore the default settings of the appliance.
- REGISTER: to obtain the registration key for the online registration
at the Reciva Customer Portal. Read the paragraph "Registering the
appliance" in this manual.
- CLOCK SETUP: to set the clock functions. Read the paragraph
"Clock functions" in this manual.
- WIFI STRENGTH: to check the signal strength for the current
connection.
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
To Next Page
Loading...
