● Connect the female connector on the mains
cable to the DC IN 9 V connection.
● Connect the mains plug to a wall socket.
Connecting to the Internet3.3
A wireless access point (e.g. wireless router) is used to connect to the Internet.
The wireless network is identied with an SSID, the name of the network.
If the appliance is used for the rst time, set the network name to access the
Internet.
Connecting to the Internet automatically
● Switch on the appliance.
● Press the MENU button (18). Rotate or press the VOLUME dial (11)
or press the UP button (29) or the DN button (28).
● Navigate to CONFIGURE and press the SELECT button (27).
● Navigate to NETWORK CONFIG and press the SELECT button (27).
● Navigate to SCAN FOR NETWORKS and press the SELECT button (27).
● Navigate to the required network name and press the SELECT button (27).
● If necessary, enter the password. Read the paragraph "General functions".
Connecting to the Internet manually
● Switch on the appliance.
● Press the MENU button (18). Rotate or press the VOLUME dial (11)
or press the UP button (29) or the DN button (28).
● Navigate to CONFIGURE and press the SELECT button (27).
To Next Page
Loading...
