17
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
Using the remote control
• Direct the remote control towards the
signal receptor at the front panel of the
indoor unit, as illustrated (Fig. 10).
• Ensure that there are no objects
between the remote control and the
signal receptor at the front of the air
conditioner’s indoor unit.
• Operate the remote control from a
maximum distance of 3m.
• Never leave the remote control exposed
to direct sunlight.
• Keep the remote control at a distance of at least 1m from any television or
other electrical appliances.
The remote control may be kept in a wall-mounted holder (supplied). Just attach
it to a suitable wall, as illustrated (Fig. 11), and store the remote in easy reach.
Fig. 11 Remote control holder
Instructions (Cont.)
Fig. 10
Signal receptor
Replacing the batteries
When there is no beep confirmation from the indoor unit, or when the LCD
does not activate, it is time to replace the batteries. Take off the cover at back
and replace the old batteries with fresh ones of the same size and type. See
“Inserting/replacing batteries”, page 13, for detailed instructions.
NOTE: Only remove the batteries from the remote control when the air
conditioner is not in operation.
To Next Page
Loading...
