18
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
The airflow direction (Fig. 12) ensures even
distribution of cool air in the room (or warm air,
in heating mode).
• Press the SWING button to activate the
deflectors for right/left air movement.
• Press the SWING button to activate the flaps
for up/down air movement.
• Press both SWING buttons to activate both
airflow directions for 3D air circulation.
Airflow swing control
InstructionsInstructions (Cont.)
CAUTION!
• Always adjust the airflow while the unit is switched off.
• Never attempt to change the flap position manually, as this could
seriously damage the delicate flap activating mechanism.
• DANGER! Never insert your hand or objects in the unit’s air outlet. It
contains a fan that turns at high speed.
• In COOLING mode, make sure the flaps (Fig. 13)
are oriented upwards so the cooled air is directed
upwards – it will automatically sink down.
• In HEATING mode, the flaps (Fig. 13) should be
oriented downward, as warm air tends to rise
upwards.
movement Deflectors Flaps
Flap
movement
Fig. 13
Fig. 12
To Next Page
Loading...
