Akai AK-T70R32

19
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
Instructions (Cont.)
COOLING mode
In COOLING mode (Fig. 14) the air
conditioner will cool down the room
to your set temperature and reduce
the humidity in the air at the same
time.
• To activate the cooling function, press the
MODE button on the remote control until
the cooling symbol ( ) appears on the
display.
• To activate the cooling cycle, use the or
button to set the temperature lower than
the current ambient room temperature.
• To optimise the air conditioner’s cooling
function, set the temperature as described
above, then also adjust the speed (by
pressing the FAN button) and the airflow
direction (see page 18).
HEATING mode
In HEATING mode (Fig. 15) the air
conditioner will heat up the room to
your set temperature.
• To activate the heating function, press the
MODE button on the remote control until
the heating symbol ( ) appears on the
display.
• To activate the heating cycle, use the or
button to set the temperature higher than
the current ambient room temperature.
• To optimise the air conditioner’s heating
function, set the temperature as described,
then also adjust the speed (by pressing the
FAN button) and the airflow direction (see
page 18).
Fig. 14
Fig. 15