23
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
TIMER OFF function
Program the timer to switch the
unit off automatically (Fig. 22).
• To program the switch-off time, the air
conditioner must be switched on.
• Press the TIMER button on the remote
control for the first time to activate the
timer, then use the or button to set
the time period after which the unit will
switch off. With every press of the or
button, the time will adjust by half an
hour.
• Press the TIMER button a second time
to confirm the setting. The TIMER icon
will be illuminated on the indoor unit
display (Fig. 21).
• To cancel the set function, press the
TIMER button again.
Instructions (Cont.)
Fig. 22
NOTE: The timer can be set, in half-hourly intervals, up to a maximum of 24
hours (Fig. 23).
Fig. 23
To Next Page
Loading...
