24
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
Instructions (Cont.)
AUTO mode
In AUTO mode (Fig. 24) the fan speed
and temperature are set automatically
according to the room temperature
(tested by the temperature sensor
incorporated in the indoor unit) to
ensure and maintain comfortable
conditions.
• To activate AUTO mode, press the MODE
button on the remote control until the auto
symbol ( ) appears in the display.
• The unit will cool, heat or dry the room
automatically, depending on the current room
temperature, as listed in the table below.
Ambient temp. Operation mode Auto temp.
< 20°C Heating 23°C
20°C – 26°C Drying 18°C
>26°C Cooling 23°C
• To optimise the efficient working of the air conditioner, adjust the
temperature (only 2°C), the speed and the airflow direction by pressing the
relevant buttons.
Fig. 24
I FEEL function
When the I FEEL function (Fig. 25) is
selected, the appliance will automatically
regulate the room temperature based
on the temperature (0–50°C) around the
remote control.
• To activate the I FEEL function, press the I FEEL
part (left side) of the button on the remote
control until the I FEEL symbol ( ) appears in
the display.
• This function will terminate two hours after
activation.
Fig. 25
C
To Next Page
Loading...
