25
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
Instructions (Cont.)
Turbo function
Press the TURBO button to produce maximum cooling or heating performance in
the shortest time.
I SET function
In COOLING, HEATING, FAN and DRY mode
you can save certain settings as your favourites
so you do not have to select them again the
next time you want to run the air conditioner on
these settings.
You can adjust the temperature (in COOLING
and HEATING mode), the fan speed (in
COOLING, HEATING and FAN mode) and the
swing settings (in COOLING, HEATING, FAN
and DRY mode).
• When you have selected your favourite settings,
press and hold the I SET button for more than 3
seconds until “AU” appears on the display and
the background of the display lights up. The
remote controller will now run and remember
these settings.
Fig. 26
Eco function
Press the ECO button to achieve energy savings while running the unit.
Depending on the mode selected, the room temperature will be allowed to
rise 2°C above (or fall 2°C below) the set temperature before cooling/heating
restarts.
Child lock function
Press the MODE and TIMER buttons at the same time to activate the child lock.
All buttons on the remote control are now locked. To unlock the child lock, press
both buttons again.
C
• You can reset the settings by repeating the above operation.
• To activate this function, press the I SET button. The air conditioner will run
according to the previously selected settings and on the remote control
display, “AU” will be flashing (Fig. 26).
• Press the button again to cancel this function.
To Next Page
Loading...
