Akai AK22FLEDCG

24
Menu Operation in DTV Mode (Cont.)
Picture Mode
Press MENU button to display the main menu.
Press / button to select PICTURE, then press OK button to enter sub-menu.
Press / button to select available options: Dynamic, Standard, Mild, User.
Tips:
• Press P-MODE button on the remote control to change the picture mode directly.
• You can change the value of Contrast, Brightness, Colour and Sharpness only when the
picture mode is User.
Contrast
Press / button to select Contrast, then press OK button to enter sub-menu. Press /
button to adjust.
Brightness
Press / button to select Brightness, then press OK button to enter sub-menu. Press /
button to adjust.
Colour
Press / button to select Colour, then press OK button to enter sub-menu. Press /
button to adjust.
Tint
Press / button to select Tint, then press OK button to enter sub-menu. Press / button
to adjust.
NOTE: This item is available only in NTSC system.
Sharpness
Press / button to select Sharpness, then press OK button to enter sub-menu. Press /
button to adjust.
Colour Temp
This item is used to adjust the optimum colour temperature for suitable viewing.
Press / button to select Color Temperature, then press OK button to enter sub-menu.
Press / button to select available options: Normal, Cold, Warm.
Menu Operations in DTV Mode (Cont.)
Picture menu
Picture Mode
Press ▲/▼ button to select this item and press OK button to enter it. Then use ▲/▼ button to
select desired picture mode: Dynamic, Standard, Mild, User.
Tips:
● Press P-MODE button on remote control to change the picture mode directly.
● You can change the value of Contrast, Brightness, Colour and Sharpness only when the picture
mode is User.
Contrast: Press
◄/► button to adjust the picture contrast.
Brightness: Press
◄/► button to adjust the picture brightness.
Colour: Press ◄/► button to adjust the picture colour.
Tint: Press ◄/► button to adjust the picture tint (not available for all channels).
Sharpness: Press
◄/► button to adjust the picture sharpness.
Colour Temp
Press
▲/▼ button to select this item and press OK button to enter it. Then use ▲/▼ button to
select desired colour temperature: Cold, Normal, Warm.
Noise Reduction
Press ▲/▼ button to select this item and press OK button to enter it. Then use ▲/▼ button to
select desired noise reduction: Off, Low, Medium, High, Default.
24