9
Connections and Functions
1. LED display screen.
2. Power indicator - In standby mode the
indicator light is red. When the TV is
switched on, the indicator light shows blue.
3. Remote control sensor.
4. Stand holder.
5. Disc Slot - To insert a disc according to the
silkscreen on the side of the slot.
6. - To play or pause playing (DVD)
7. - To open or close the disc compartment.
8. VOLUME +/- button - To increase/decrease
the volume level or move left/right.
9. CHANNEL +/- button - To select next/
previous channel or move up/down.
10. MENU button - To enter menu setting page.
11. SOURCE button - To select the input source.
12. POWER button - To turn the TV On/O.
1.
LED display screen
2.
Power indicator- In standby mode the
indicator shows red; when switching on
the unit the indicator shows blue.
3. Remote control sensor
4.
Stand holder
5.
Disc slot- To insert a disc according to
the silk screen on the side of this slot.
6.
- To play or pause playing (DVD).
7.
- To open or close the disc
compartment.
8.
VOLUME +/- button- To
increase/decrease the volume level or
move left/right.
9.
CHANNEL +/- button- To select
next/previous channel or move
up/down.
10.
MENU button- To enter menu setting
page.
11.
SOURCE button- To select the input
source.
12.
POWER button- To turn the TV ON/OFF.
Controls and Connections
1.
LED display screen
2.
Power indicator- In standby mode the
indicator shows red; when switching on
the unit the indicator shows blue.
3. Remote control sensor
4.
Stand holder
5.
Disc slot- To insert a disc according to
the silk screen on the side of this slot.
6.
- To play or pause playing (DVD).
7.
- To open or close the disc
compartment.
8.
VOLUME +/- button- To
increase/decrease the volume level or
move left/right.
9.
CHANNEL +/- button- To select
next/previous channel or move
up/down.
10.
MENU button- To enter menu setting
page.
11.
SOURCE button- To select the input
source.
12.
POWER button- To turn the TV ON/OFF.
To Next Page
Loading...
