USB functions5.4
After the device has been connected, a content menu will display on the
TV screen.
● Press the arrow buttons (up and down) (26) to select a folder or a le.
● Press the ENTER button (27) to enter the selected folder or le.
You can also use the digit buttons (29) to select a folder or to play the le.
● Press the PROGRAM button (45) to switch between folders and les.
Press the ENTER button (27) to conrm.
● Press the MENU button (48) to return to the content menu during
playback.
During playback, the following functions are available:
● To select a track, press the NEXT button (39) or the PREV button (40)
until the desired track is set.
● To pause playback, press the PLAY/PAUSE button (38) once.
To resume playback, press the PLAY/PAUSE button (38) again.
● To stop playback, press the STOP button (47).
● To remove the device, gently pull it out of the slot.
i
Due to the great variety of products with USB ports and their
sometimes quite manufacturer-specic functions we can neither
guarantee that all devices will be recognised, nor that all operating
options that are possible in theory will actually work.
Clock functions5.5
With the clock function, the following parameters can be set:
current time -
daily timer -
sleep timer -
Setting the current time
The current time can only be set in standby mode.
● Press the CLOCK button (28) twice. The hour digits start ashing.
● Press the VOL +/- button (30) to set the hour.
● Press the CLOCK button (28). The minute digits start ashing.
● Press the VOL +/- button (30) to set the minutes.
● Press the CLOCK button (28) to conrm.
To Next Page
Loading...
Need help?
General
