Operation5.
All functions of the appliance are accessible using the remote control.
All instructions refer to operation with the remote control, unless indicated
otherwise.
General functions5.1
● To switch on the appliance, press the STANDBY button (16).
To switch off the appliance, press the STANDBY button (16) again.
● To select the source mode (TUNER/CD/USB/SD), press the FUNCTION
button (17). Alternatively, press the corresponding function button
(25/26/34/35).
● To adjust the volume, press the VOLUME + button (38) or the
VOLUME - button (37).
● To enable the enhanced bass, press the BASS button (44).
To disable the enhanced bass, press the BASS button (44) again.
● To mute or restore sound, press the MUTE button (42).
● To enable the sound mode (FLAT/CLASSIC/ROCK/POP/JAZZ), press
the EQ button (43).
● To connect a headphone, insert the cable plug in the headphone jack.
To prevent hearing damage, remember to adjust the volume to
a comfortable level.
● To connect an external audio device, insert the cable plug in the AUX IN
jack (8).
Clock functions5.2
Setting the current time (stand-by mode)
● Press the CLOCK ADJ button (31). The display (4) shows the time and
ashes.
● Press the NEXT button (40) or the PREV button (19) to select the clock
setting (12H mode and 24H mode).
● Press the CLOCK ADJ button (31) to store the setting.
● Press the NEXT button (40) or the PREV button (19) to set the desired
hour.
● Press the CLOCK ADJ button (31) to store the setting.
To Next Page
Loading...
