Memory card functions5.8
● Switch on the appliance. Select the memory card mode.
● Insert the SD/MMC device in the slot (11). The device can only be
connected one way.
● To start playback, press the PLAY/PAUSE button (41) once.
● Press the FOLDER UP button (22) or the FOLDER DN button (23) to
select a folder or a le.
● Press the NEXT button (40) or the PREV button (19) to select a track.
● Press the PLAY/PAUSE button (41) to start playback.
During playback, the following functions are available:
● To select a track, press the NEXT button (40) or the PREV button (19)
until the desired track is set.
● To search for a specic point on the track, hold the NEXT button (40) or
the PREV button (19) until the point is reached and release the button.
● To pause playback, press the PLAY/PAUSE button (41) once. To resume
playback, press the PLAY/PAUSE button (41) again.
● To stop playback, press the STOP button (20).
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance
is very dirty, dampen the cloth slightly with water and a neutral solution.
● Clean the lens with a camera lens brush/blower (not included) if the lens
is dirty.
To Next Page
Loading...
