5.5. AUX IN
To use the AUX-IN port, slide the FUNCTION switch (4) to the position CD/USB/AUX
Connect the external appliance to your APRC60AT.
AUX appears on the display.
5.6. Auto Power System (APS)
The Auto Power System (APS) is intended to save energy. In the following situations, the device will go into
Standby mode after 15 minutes:
The FUNCTION (4) switch is in the CD/USB/AUX position and there is no CD in the CD compartment, or the
CD has finished playing.
The FUNCTION (4) switch is in the CD/USB/AUX position and there is no USB drive in the USB port, or the
USB drive has finished playing.
The FUNCTION (4) switch is in the CD/USB/AUX position and there is no AUX cable connected.
To switch on the appliance, press the STANDBY button (7).
To Next Page
Loading...
Need help?
General
