5.Operation
5.1. Quick start
General functions
Turn the device on by sliding the FUNCTION switch (4) to the CD/USB/AUX position and pressing the
STANDBY button . You can put the device in standby mode by pressing the STANDBY button one more
time.
To select the source mode (RADIO-CD/USB/AUX-OFF), slide the FUNCTION switch (4) to the desired
position.
To adjust the volume level, turn the VOLUME dial (1) until the desired level is set.
To enable the enhanced bass, press the BASS button (5). Press the button again to disable the enhanced
bass.
Radio functions
To select the radio function, slide the FUNCTION switch (4) to the radio position.
Slide out the antenna
To adjust the frequency, turn the TUNING knob (18) until the desired frequency is reached.
For extended instructions, read the paragraph "Radio functions" further on in this manual.
CD functions
To select the CD function, slide the FUNCTION switch (4) to the CD/USB/AUX position.
To Next Page
Loading...
Need help?
General
