To Next Page

To Previous Page

To insert a CD:

 Press the CD compartment (16) to open the appliance

 Insert the CD with the label upwards

 Close the CD compartment

 Make sure that no external device is connected to the AUX IN port.

 To start playback, press the PLAY/PAUSE button (8) once.

 Hold down the button PLAY/PAUZE (8) for longer than 1 second to switch between USB mode and CD

mode.

For extended instructions, read the paragraph "CD functions" further on in this manual.

USB functions

 To select the USB function, slide the FUNCTION (4) switch to CD/USB/AUX.

 Make sure that no external device is connected to the AUX IN port.

 Insert the USB device in the slot (3). The device can only be connected one way.

 To start playback, press the PLAY/PAUSE button (8) once.

 Hold down the button PLAY/PAUZE (8) for longer than 1 second to switch between CD mode and USB

mode.

For extended instructions, read the paragraph "USB functions" further on in this manual.

AUX IN jack

 To use the AUX-IN port, slide the FUNCTION switch (4) to the position CD/USB/AUX

 To connect an external audio device, insert the cable plug in the AUX IN jack (2).

For extended instructions, read the paragraph "AUX IN€•" further on in this manual.

Akai APRC60AT User Manual

Questions and Answers: