ENGLISH
Cassette Tape
oo
oooo
/
/
/
Tape Playback
Before playback:
To interrupt playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette compartment by pushing the STOP/
EJECT / button.
4
Load a cassette into the cassette compartment with the
side to be played facing up.
5
Press the PLAY button.
6
To advance the tape, press the STOP/EJECT
/
button,
then press the F.FWD button. To rewind, press the
STOP/EJECT
/
button, then press the REWIND but-
ton.
Listening to a cassette tape
PAUSEPAUSESTOPSTOP/EJECTEJECTF.FWDF.FWDREWINDREWINDPLAYPLAYRECORDRECORD
TAPETAPE
Press the PAUSE button during
playback.
Press the PAUSE button again
to resume playback.
Precautions:
/
/
Be sure not to press the PLAY and REWIND buttons simultaneously, or the tape will
become damaged.
Before changing from one tape operation to another, press theSTOP/EJECT button.
Do not press the PAUSE button whilst the fast forward or rewind operations are in progress.
The F.FWD or REWIND button will not be released when the tape end is reached. Once
this occurs, press the STOP/EJECT button.
Tape play button will automatically released when the end of the tape has been reached.
Fast forward or rewind button cannot automatically released when the end of the tape has been
reached. Make sure to press the STOP/EJECT button when the end of the tape has been
reached.
To stop playback:
/
/
Press the STOP/EJECT button.
Notes:
70
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
EQ
ON/STAND-BY
EQ
ON/STAND-BY
To Next Page
Loading...
