ENGLISH
Memorising a station
To recall a memorised station
oo
oooo
/
/
/
Radio
Listening to the radio (continued)
If a whistling noise occurs when recording from an FM or AM station, set the BEAT CANCEL
switch to 1 or 2, whichever gives the best reception.
1 Perform steps 1 - 3 in "Tuning" on page 18.
2 Press the MEMORY/DISP button to enter the preset tuning
saving mode.
3 Within 10 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
MHz
4 Within 10 seconds, press the MEMORY/DISP button to
store that station in memory.
If the "MEMORY" and preset number indicators disappear be-
fore the station is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
MEMORY
MHz
Aerial adjustment:
Beat cancel switch:
Note:
You can store 20 FM and 10 AM stations in memory and recall themat the push of a button.
(Preset tuning)
The backup function protects the memorised stations for a few hours should there be a power
failure or the AC power lead disconnection.
Press the PRESET ( or ) button to select the desired station.
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
TAPE
69
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
FM AM
EQ
ON/STAND-BY
EQ
ON/S
T
AND-BY
To Next Page
Loading...
