ENGLISH
oo
oooo
/
/
/
USB Memory Playback
Listening to USB mass storage device/ MP3 player (continued)
To remove USB memory device
3 Select desired file to be played back by pressing the
/ button.
4
Press the USB
/
button.
Playback will be start and the MP3 or WMA indicator will be
displayed.
Title, Artist and Album name is displayed if it is recorded on the
disc.
Display content can be changed by pressing the MEMORY/
DISP button.
MP3 ID3-Tag only support version 1.x.
TRACK
MP3
TRACK
MP3
TRACK
MP3
TRACK
MP3
TRACK
MP3
TRACK
MP3
TRACK
MP3
TRACK
MP3
FOLDER
NUMBER
TRACK
NUMBER
ALBUM NAME ARTIST NAME
TITLE NAME
1 Press the USB button on main unit.
2 Disconnect USB memory device from the USB terminal.
3 "NO USB" will appears on FL display.
Note:
To pause playback:
Press the USB button.
/
AKAI will not be held liable for the
loss of data whilst the USB memory
device is connected to the audio
system.
Files compressed in MP3 and / or
WMA format can be played back
when connected to the USB terminal.
This USB memory's format supports
FAT 16 or FAT 32.
AKAI cannot guarantee that all USB
memory devices will work on this
audio system.
This USB memory cannot be operated via USB hub.
If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported
playback file" is selected.
In case the data inside the USB memory is large, it may take a longer time for data to be read.
External storages cannot be playback via the USB terminal.
The USB terminal in this unit is not intended for a PC connection but is used for music streaming
with a USB memory device.
Notes:
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
TAPE
65
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
To Next Page
Loading...
