MW radio reception
The frequency step required for tuning to stations broadcasting from Europe,
Africa and China is 9 kHz. The frequency step required for tuning to stations
broadcasting from USA and Canada is 10 kHz.
● Switch off the appliance.
● Press the ST/BW button (6). The current frequency step appears on the
display.
● Press the ST/BW button (6) again to change the setting.
Clock functions5.3
With the clock function, the following parameters can be set:
current time -
alarm time -
Setting the current time
● Switch off the appliance.
● Press the PROGRAM button (11) once. The display (18) shows the time
and ashes.
● Press the SEARCH UP button (15) to set the hour.
● Press the SEARCH DOWN button (14) to set the minutes.
● Press the PROGRAM button (11) to store the settings and exit.
Setting the alarm time
Four time slots are available (AL1, AL2, AL3 and AL4).
● Switch off the appliance.
● Select the required time slot:
To select AL1, press the corresponding button (23). The alarm icon (39) •
appears on the display.
To select AL2, press the corresponding button (22). The alarm icon (38) •
appears on the display.
To select AL3, press the corresponding button (21). The alarm icon (37) •
appears on the display.
To select AL4, press the corresponding button (20). The alarm icon (36) •
appears on the display.
● Press the SEARCH UP button (15) to set the hour.
● Press the SEARCH DOWN button (14) to set the minutes.
● Press the alarm button again to conrm.
To Next Page
Loading...
Need help?
General
