iPod functions5.2
Installing and removing an iPod
● To install an iPod:
Open the cover (13).•
Choose the correct dock adaptor. Refer to the table below.•
Insert the dock adaptor into the dock.•
Insert the iPod into the dock adaptor.•
● To remove an iPod:
Press the STOP button (23). •
Pull the iPod gently out of the dock adaptor.•
To remove dock adaptor, pull the dock adaptor gently out of the •
appliance.
!
CAUTION
When connecting an iPod, ensure that the correct dock adaptor is
placed.
i
Whilst the iPod is docked in the system, its battery is charged
automatically. When the battery is fully charged, the charging
process is completed.
Dock adaptor compatibility
Model Memory size Adaptor type
iPod 1G Nano 8/11
iPod 2G Nano 8/11
iPod 4G Nano 8 GB & 16 GB 17
iPod Video 30 GB 9
iPod Classic 80 GB & 120 GB 9
iPod Video 60 GB & 80 GB 10
iPod Classic 160 GB 10
Audio playback
During playback, the following functions are available:
● To select a track, press the PREV button (34) or the
NEXT button (35) until the desired track is set.
To Next Page
Loading...