Installation3.
● Put the appliance on a horizontal at surface.
● Connect the random equipment to the appliance.
Read the paragraph "Connecting random equipment".
● Connect the appliance to the mains. Read the paragraph
"Connecting to the mains".
● Install the batteries in the remote control. Read the paragraph
"Remote control".
!
CAUTION
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
i
This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives or
cleaning sprays cause the rubber to soften and leave marks or
a residue on the furniture, and potentially risk the surface to
become damaged. To prevent damage to wooden surfaces, we
recommend that you apply self-adhesive pads to the bottom of the
rubber feet before installation.
Connecting random equipment3.1
Audio connections (input)
These connections allow you to
receive audio signal from a connected
CD/DVD or amplier.
● AUX IN: Connect a suitable cable to
the L/R channels of the AUX IN
connection.
To Next Page
Loading...