Operation5.
All functions of the appliance are accessible using the remote control.
All instructions refer to operation with the remote control, unless indicated
otherwise.
Quick start5.1
General functions
● To switch on the appliance, press the STANDBY button (18). To switch off
the appliance, press the STANDBY button (18) again.
● To select the source mode (TUMER/iPOD/AUX-IN), press the SOURCE
button (19).
● To adjust the volume, press the VOL + button (27) or the VOL - button (28).
● To enable the sound mode (CLASS/POP/ROCK/JAZZ), press the EQ
button (36). To disable the sound mode, select FLAT.
● To mute or restore sound, press the MUTE button (38).
iPod functions
● Select the matching dock adaptor for your iPod. Insert the dock adaptor in
the docking station (12). Place the iPod on the dock adaptor.
● Switch on the appliance. Select the iPod mode.
● To start playback, press the PLAY/PAUSE button (20) once.
● For extended instructions, read the paragraph "iPod functions" further on
in this manual.
Radio functions
● Switch on the appliance. Select the tuner mode.
● To quickly install the station list: Press the SCAN button (29) to start the
search program that sets the available channels automatically.
● For extended instructions, read the paragraph "Radio functions" further on
in this manual.
Clock functions
● Read the paragraph "Clock functions" further on in this manual.
To Next Page
Loading...