What
you
should
know
to
protect
yourself
Watch out! You
mightget
an
electric
shock.
• Never touch the plug with wet hands.
• Always pull out by the plug and never the cord.
• Only let a
qualified
professional
repair or re-
assemble
the
Akai
tuner.
An
unauthorized
person
might
touch
the internal parts and re-
ceive a serious
electric shock.
• Never
allow
a child to put anything, especially
metal,
into the Akai tuner.
Let's
protect
the
Akai tuner too.
• Use only a household
AC
power source. Never
use
a
DC
power source.
• Make sure that the power consumption of each
component does not exceed the wattage speci-
fied
on
the rear panel.
• If
water is spilled on the Akai tuner, disconnect
it
and
call your dealer.
•
Make sure that the Akai tuner is well ventilated
and
away from direct sunlight. Be careful not to
block the side ventilator of the Akai tuner.
•
To
avoid damage to the internal circuits and the
external surface, keep away from heat (stoves,
ete.)
• Avoid using spray type insecticide near the Akai
tuner.
It can damage the finish and might ignite
suddenly.
•
To avoid damaging the finish, never use dena-
turated
alcohol,
paint
thinner
or
other
similar
chemicals
to clean the Akai tuner.
• Place the Akai tuner on a flat and solid surface.
•
If
you
don't
plan
to
use
the
Akai
tuner
for
a
long
period
of
time,
disconnect
the
power
cord.
To enjoy the Akai tuner for a
long time, please read
this
operator's manual thoroughly.
CAUTION
To prevent
electric
shock,
do not use this
polarized AC
power
plug with
an
extension
cord
receptacle
or
other
outlet
unless
the
blades can be fully inserted to prevent blade
exposure.
2
To Next Page
Loading...
