Listening
to
the radio
5 Basic
tuning
Before proceeding, set your amplifier's input selec-
tor to the TUNER position.
o
Depress
the
POWER
button
to
turn on the
• Select the band with the BAND button.
-===-----8
Tune in a station with the TUNING
UP
> or
DOWN < button.
On
FM
station tuning (after
setting
the
BAND
to
FM)
To
set
the
tuner
to
the
automatic
FM reception
mode
Normally set the tuner to the
FM
AUTO mode with
the
FM
AUTO button. The
FM
AUTO indicator will
light
on
the FL display.
AUTO/MANUAL
i
FM
AUTO
i
When set to
the
FM
AUTO mode, the
tuner
auto-
matically
selects STEREO or MONO according to
the station which is tuned in. The
STEREO indica-
tor
lights
up
when
a stereo
station
is
tuned
in.
When a monaural signal is tuned
in,
the MONO in-
dicator above the BLEND indicators will light up.
The
ANTENNA
select
button,
IF
BAND
select
button, BLEND select button and the HI-CUT but-
tons
are
set
automatically by the microcomputer.
Pressing
any of these buttons will cancel the
FM
AUTO mode.
Eliminating inter-station noise during tuning
MUTING
I I
The FL (Fluorescent)
display
MUTING
Indicator
Tells you the muting system is engaged.
FM
AUTO
indicator
Tells you the tuner is
in
the
FM
auto mode.
Press the MUTING button. The MUTING indicator
will light up and inter-station noise will be eliminat-
ed during tuning.
• If you want to tune in a weaker station, press the
MUTING
button
once again. The MUTING
in-
dicator will go off and inter-station noise will be
heard during station tuning.
Band
Indicators
SCAN AUTO/MANU
Indicator
Tells you which band is selected. Tells you which tuning mode (manual
or
automatic) the tuner is set at.
:
:.::,~~
TI
AM
MW
I I I I I I I I
1kHz
r---1:STEREO
-r
FM
LW
I U
U.
U U
MHz
L STEREO
Indicator
TUNED
Indicator
'-----
Frequency/Number
display
Tells you the received station is Tells you a station is tuned in. Shows tuning frequency
in
the stereo mode. (MHz/kHz) and the memorized
PRESET STATION number
(1-10/11-20).
To Next Page
Loading...
