Akai AT-93/L

Controls
o
8
8
POWER button
To turn the power on and off.
ANTENNA Select button
To select the main or sub FM antenna.
IF BAND Select button
To select the wide or narrow FM IF (Inter-
mediate Frequency) band.
BLEN D
select button
To select the blend mode during FM stereo
reception.
HI-CUT button
To turn the high cut filter on or off during re-
ception.
FM AUTO button
To set the tuner to the automatic FM recep-
tion mode.
LED
(Light Emitting Diode) Indicators
Tells you which mode the tuner is in.
FL (Fluorescent) Display
Shows tuning information.
LED Indicators
SIGNAL Strength Indicators . , .
Tells you the strength of the received station s signal.
(;) 0
=~:.=;-:i~
_'""_1-..,· ... '''"'''-201
/
CD
PRESET SCAN button
To set the tuner to the automatic preset sta-
tion scan mode.
MEMORY button
To memorize preset stations. Press the
button once to memorize preset station num-
bers 1 to
10. Press the button twice to memo-
rize preset station numbers
11 to 20.
PRESET STATION Buttons and Indicators
(1/11 to 10/20)
To memorize preset stations and tune in
. memorized stations.
TUNING buttons (UP >/DOWN <)
To tune in a station manually.
SCAN MODE Select
button
To select the manual or automatic tuning
mode.
BAND
Select Button
To select the band.
MUTING button
To cut inter-station noise during tuning.
HIGH CUT Indicator
Tells you the high cut filter is engaged.
I
----------
SIGNAL
I
/
2 4 6
B
10
MONO
ANT B
NARROW BLEND 2 HI-CUT
ANT A
WIDE;
BLEND 1
ANT A and B Indicators
/
I: / BLEND 112 and MONO Indicato"
Tells you the blend mode selected.
Tells
you which antenna is selected.
NARROW
and WIDE Indicators
Tells you which IF band of the tuner is selected.
4