6-way Tuning system
This quartz synthesizer tuner incorporates a 6-way
tuning system.
Before tuning
in
a station
Set
the
amplifier's
input
select
button
to
the
TUNER
position.
Method
* Before tuning in a station manually or automati- 6
cally,
remember
to
select
the
band
with
the
BAND select button.
*
When
using
a preset station button for tuning,
make
sure
that you have already memorized a
station.
Operation
Manual tuning
Set
the
SCAN MODE to MANUAL with the SCAN MODE button,
then repeatedly press the
TUNING
UP
> or DOWN < button until
a station is tuned in.
* To
quickly
change the frequency, depress the TUNING button
continuously. For fine tuning press the button repeatedly.
Automatic tuning
Set the SCAN MODE to AUTO with the SCAN MODE
button,
then
press the
TUNING
UP
< or
DOWN>
button once.
Preset station tuning
Press the preset station button once or twice depending on
which
preset station you want to listen
to.
Automatic preset scan tuning
Press
the PRESET SCAN button once. Automatic preset station
scanning
is
engaged.
To
stop
at a preset
station,
press
the
PRESET SCAN
button
again or
press
the PRESET
STATION
button that holds the station you want to listen
to.
Manual preset station tuning Repeatedly press the PRESET SCAN button.
Sequential station call tuning with an
Make
sure
you have
tuned
in and memorized a station at the
optional audio timer
PRESET STATION number 20 before turning off the power. For
operation details see page
7.
How
to
memorize
a preset station
Select the band with the BAND button.
AKAI
...
_,
..
,.
__
,_
... "
Notes
•
As
well as memorizing the band and frequency
of a preset station, the tuner's memory system
also
memorizes
the
ANTENNA,
IF
BAND,
HI-CUT and FM AUTO
button's
modes during
preset station memorization.
• If a PRESET STATION
button
is not pressed
within
5 seconds after the MEMORY button is
pressed, the memory operation will be cancelled
automatically.
• If you are using timer controlled preset station
tuning
(Sequential station call function), make
sure
you have memorized the desired stations
at the
PRESET STATION numbers 20,
19
and
18
(See page 7).
Tune in a station you want to memorize with
the
TUNING
UP
< or
DOWN>
button.
Press the
MEMORY button as follows;
Press the button once
.....................
.
To memorize channels 1 to
10. The M in-
dicator
and
1-10
display
will appear on
the
FL
display.
Press the button twice
....................
.
To memorize channels
11
to 20. The M
in-
dicator
and
11-20
display will appear on
the FL display.
Press the button three times
...............
.
To
cancel
the
memory
operation.
The
normal tuning display will appear.
Within
5 seconds
Press the
PRESET STATION button where
you want to memorize the station.
When pressing a
PRESET STATION button,
it's indicator will light up.
After completing a preset station memorization, to
memorize more stations, repeat the above
steps
1
through
4.
To Next Page
Loading...
