replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
SPECIFICATIONS
GENERAL
Model: ATT-E10
Dimensions: 420 (W) x 376(D) x 62(H)mm
Weight: 3.10Kg
Power supply: Dual Voltage: DC 115V~60Hz/230V~50Hz, User Selectable
Power consumption: 5W
Standard test condition: Ambient Temperature: 23 +/- 2 degC
Relative Humidity: 65% +/- 5%
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
TURNTABLE SECTION:
Type 3-speed full manual
Motor DC motor
Driving Method Belt drive
Turntable Platter (Plastic) 198mm dia.
Speeds 33 1 / 3, 45, 78rpm
S/N Ratio More than 50dB
Starting Time Less than 1 sec with 33 1 / 3
Braking Time Less than 1 sec. with 33 1 / 3
Time for Speed Change Less than 1 sec. from 33 1 / 3 to 45 rpm
Less than 1 sec. from 45 to 78 rpm
TONE ARM SECTION:
Type Ceramic stereo cartridge with ruby stylus
Applicable Cartridge Weight 3.5~8.5g
Anti-skating Range 0-4g
Frequency Response 20Hz-20KHz
Channel Separation More than 15dB
Recommended stylus pressure 4 to 6 grams
Channel Separation More than 15dB
Channel balance (at 1kHz) below 1 dB
Tracking Force adjustment Range 3~4g
FUNCTIONS:
1. Playback speed: 33.3, 45,78 RPM
2. Built-in Stereo Speaker
3. RCA audio out
4. Plays 7", 10" & 12" Records
MAIN TECHNICAL SPECIFICATIONS
To Next Page
Loading...
