Need help?Do you have a question about the Akai ATT05U and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Turntable size | 330 mm |
| Pick-up arm length | 220 mm |
| Signal-to-Noise Ratio (SNR) | 50 dB |
Covers reading instructions, water/heat, power sources, grounding, cord protection, and general handling.
Addresses cleaning, electrical checks, non-use periods, and protection against lightning.
Setting the voltage selector switch for dual voltage operation to match power supplies.
Check for all included parts like platter, slipmat, headshell, and cables.
Instructions for attaching the rubber belt and initial setup notes.
Steps for attaching the 45-rpm adaptor, turntable platter, and slip mat.
Guidance on installing the cartridge and attaching the headshell to the tonearm.
Adjusting counterweight, zero balance, stylus pressure, and anti-skate.
Attaching the transparent dust cover to the unit's hinges.
Recommendations for avoiding direct sunlight, heat, humidity, dust, and vibrations.
Adjusting the unit's legs to ensure horizontal stability.
Connecting the power cord to an AC outlet before other connections.
Connecting the RCA cable to the amplifier's PHONO or LINE input.
Connecting the turntable to a computer via USB for recording.
Turning the unit on, placing a record, setting speed, and preparing the tonearm.
Using the Start/Stop button and cueing lever to play a record.
How to stop platter rotation and lift the tonearm to suspend playback.
Using the pitch control to adjust playback speed by +/- 10%.
Using the strobe dots on the platter edge for speed verification.
Periodically cleaning the stylus and replacing it when worn.
Wiping down the unit and dust cover with a soft, dry cloth.
Adapter for playing 7" EP vinyl records with large center holes.
Component that holds records centered and spins them at a consistent speed.
Visual indicators on the platter for speed and pitch monitoring.
Spindle for platter stability and pilot lamp for strobe effect illumination.
Controls for turning power on/off and initiating platter motion.
Headshell connection, locking nut, S-shaped tonearm, and cueing lever functions.
Buttons for 33/45 RPM selection and the pitch adjustment slider.
Securing the tonearm, anti-skate adjustment, and stylus pressure ring.
USB port for connecting to a computer for vinyl recording with Audacity.
Switch for output mode and connection for reducing hum and noise.
Connects to amplifier inputs, with color-coding for left and right channels.
Steps to connect input source, USB lead, and configure Audacity preferences.
Setting playback and recording devices and channels within Audacity.
Instructions on how to save the project file and its data.
Steps for setting up the turntable, starting, pausing, and stopping recording.
Details on model, dimensions, weight, power supply, and test conditions.
Specifications for motor, platter, speeds, wow/flutter, S/N ratio, and USB function.
Specifications for arm length, tracking error, cartridge weight, and needle pressure.
Details on EQ amplifier output levels and frequency response.
Information on proper disposal of the product as electronic waste.
To Next Page
